Listly by water zhang
ZMS insulated cables have a variety of insulation materials, which are suitable for different needs and have different purposes. Its insulation materials are polyethylene, cross-linked polyethylene, etc. Insulated cables made of different insulation materials are subject to strict quality system testing.
The function of the cable insulation layer is to use a non-conductive substance to isolate or wrap the charged body to prevent electric shock and provide a safety measure for protection.
XLPE Low-Voltage Power Cables are mainly used for power transmission and distribution in 0.6 / 1kv or lower output power systems. Its applications include construction electricity, factories, mining, petrochemical and electronic communications, etc.
Low-voltage ABC cable, suitable for overhead power lines with AC rated voltage 0.6 / 1kv and below. Because it has less installation, maintenance and operation costs, it is widely used in power transmission and distribution lines of various voltage levels. At the same time, they have good corrosion resistance, so they are often used across river valleys and coastal areas.
AWA (Aluminum Wire Armored) cable is used for single-core cables because it is non-magnetic. Therefore, when the current passes through the cable, a magnetic field is generated (the higher the voltage, the larger the magnetic field). The magnetic field will induce currents (eddy currents) in the steel armor, which can lead to overheating of the AC system. The non-magnetic aluminum armored cable prevents this from happening.
ADSS cable is also called all-dielectric self-supporting optical cable. The composition of the ADSS optical cable is: A composite optical cable made by winding the optical fiber bundle on the central strengthening member. And then going through protective measures such as insulation, waterproof, reinforcement, and sheath.
ZMS ABC(Aerial Bundled Conductor) Cable has excellent electrical performance, strong short circuit resistance, long service life, lightweight, easy installation, operation, and maintenance.
Bare cables are insulated with air and used for medium and high voltage power transmission.
AAC cable is mainly used in urban areas with short distances and close supports. Its characteristics are good corrosion resistance, and it can also be used near the coast.
ZMS Airport Lighting Cable(https://kvcable.com/products/voltage-cable/airport-lighting-cable/) has developed a series of solutions to withstand the problems of water, ultraviolet, oil and grease to ensure the continuous and stable operation of lighting systems on airport runways, taxiways, and airport buildings. And then our airport cable solutions cover a full range of services from cable designs that meet specific application requirements and national standards to international logistics to the field.
LSZH cables are different from cables made of PVC cables and other compounds. When they catch fire, they produce a lot of thick black smoke and toxic gases. However, because the LSZH cable is made of a thermoplastic material, it generates only a small amount of smoke and toxic gases, and it does not contain acid gases. It can make it easier for people to escape from fire or dangerous areas.
Thermocouple cables are used to connect thermocouples to measuring instruments. Therefore, it must be made of the same material as the thermocouple cable. Otherwise, the extra thermocouple voltage will eventually lead to distorted measurement. The products are mainly used in various temperature measuring devices and have been widely used in nuclear power, petroleum, chemical, metallurgy, electric power, and other sectors.
ZMS insulated cables have a variety of insulation materials, which are suitable for different needs and have different purposes. Its insulation materials are polyethylene, cross-linked polyethylene, polyvinyl chloride, rubber insulation(ERP insulation), etc. Insulated cables made of different insulation materials are subject to strict quality system testing. Only cable products that meet the standards can be sold from the ZMS factory.
They are suitable for installation outdoors, underground and in water. And then they are also suitable for installation in power stations, wind power stations, industrial, subsea power transmission, etc.
Mineral insulated cable (MI cable) is a cable with a copper conductor core wrapped in a copper sheath and magnesium oxide powder as an inorganic insulating material to isolate the conductor and sheath.
Bare aluminum conductor ACSR, especially in the form of Aluminum Conductors Steel Reinforced (ACSR), have been widely used for Overhead Transmission Lines as the most cost-effective and dependable product.
Medium and High voltage cables are used for overhead transportation of electricity, buried transportation of electricity, and submarine transportation of electricity.
All Aluminum-Alloy Conductors (AAAC) is a concentric-lay-stranded conductor consisting of aluminum-alloy wires available in both single layer and multi-layer constructions.
0361 TQ Rubber Welding cable 1000V is For the transmission of high currents from the electric welding machine to the welding tool.
These XLPE insulated and LSZH sheathed power cables are generally used for fixed installation.
Bare conductors (AAC, AAAC, ACSR) can be used as overhead power lines, transmission lines, and distribution lines. The different conductor materials between them suitably possess different span lengths and the ability to withstand breaking strength.
The 600/1000V aluminum concentric cable is commonly used for service entrance to power transmission.
Submarine power cable is a major transmission cable for carrying electric power below the surface of the water.it is also possible to use submarine medium voltage power cables beneath fresh water.
The power cables single core are mainly used in power stations, mass transit underground passenger systems, airports, petrochemical plants, hotels, hospitals, and high-rise buildings.
Rubber conductor wire, also known as rubber sheathed wire, is a double insulated wire with a rubber outer jacket and insulation and a pure copper conductor.
The AWA armored power cable includes an armored thermocouple, armored RTD, armored heater, and armored lead. It is mainly used for temperature measurement, signal transmission, and special heating in the chemical industry, metallurgy, machinery manufacturing, power generation, and scientific test.
Power Cable Multi Core manufactured by ZMS cable meets or exceeds the requirements of all international standards like ASTM, AS, BS, CSA, DIN, IEC, NFC, SS-etc Cu (Al) conductor XLPE insulated PVC sheathed armored power cable have excellent electric, mechanical properties.
ZMS Cable supplies the most suitable aluminum-copper conductor low power cable and cable accessories for various engineering customizations.