Top 5 Most famous Applications, Uses & types of Condensate Pot

Condensate pots are primarily used to improve the precision of differential pressure flow measurement in steam (or vapor) applications. They’re used to make sure that steam condensation in the impulse lines doesn’t interfere with the ability to accurately sense differential pressure variations and to reduce gauge line error caused by differences between pairs of impulse lines. Riddhi Siddhi Metal Impex is a leading manufacturer of Condensate pots, Steam Condensate pots, Condensate pot level gauges, and Condensate Seal Pots in a variety of shapes and sizes as per the customers’ requirement.

The condensate pots often help to trap any foreign content in the pipeline, which helps to protect the sensitive instrumentation components. The condensate is drained from the bottom valve attachment, and the drain port is ideal for use with ball valves.

• Condensate Pot used in Refineries
• Stainless Steel Condensate Pot used in Liquid petroleum gas processing plant
• Condensate Pot used in Power Plant
• SS Condensate Pot used in Sewerage systems, industrial water lines.
• Condensate Seal Pot used in heating, air-conditioning equipment.
• Condensate Pot used in Steel Plants
• Condensate Seal Pot used in Instrumentation systems
• Condensate Pot used in Paper & Pulp Industry
• Steam Condensate Pot used in Food Industry

Condensate Pot Installation might also be vertical or horizontal lines between the primary (Flow Meter) and secondary (transmitter/gauge) to serve as a barrier to the line fluid and enable direct sensing of flow conditions.

Steps of Condensate Pot Installation

• Evaluate the number of connections required on the condensate pot before ordering (inlets, outlets, fill port, drain port, gas vent port, etc)
• Define condensate pot volume in liters and system pressure and temperature requirements.
• Consider the need to trace heat and insulate all impulse lines.
• Consider the need to add anti-freeze media such a glycol to the water lines.
• Keep vapor impulse lines as short as practicable.
• Ensure both condensate pots are mounted at the same level. The higher connection point should be the reference. Consider both Vertical and horizontal steam pipelines.
• The differential pressure measuring device (DP) should be mounted below both the condensate pots and the steam pipeline.
• It is recommended that both impulse lines from the condensate pot to the DP include the facility for ‘blowdown’. Blowing down these lines periodically ensures that the collection of debris is prevented from impacting the measurement accuracy

Condensate Pot 4 Ports Type 2

Condensate Pot 6 Ports

Condensate Pot 4 Ports Type 1

Condensate Seal Pot

Condensate Pot 3 Ports Type 2

Condensate Pot 3 Ports Type 1

Condensate Pot 4 Ports Type 3

Condensate Pot 2 Ports