how to use a leather sewing awl?

Making a wallet is actually very simple, as long as you have the right materials and basic how to use a leather sewing awl?. You can make a leather wallet as long as it has a strong needle and can sew by hand, or you can make an easier fabric wallet if you want to sew it on a sewing machine. The following is how to make leather crafting such as wallet.

Mark the size of your wallet. Use chalk or a pencil to mark the size of the wallet against the leather before cutting it. You will need to mark a sheet of deerskin for the body or bottom of the purse, and a sheet of cowhide for smaller items such as making dime sacks and cards.

Cut the leather for the body of the wallet with a sharp knife. Place the leather sheet on a cutting board and use a sharp knife to cut the leather along the lines you marked. Cut the body sheet of the wallet and all pockets. You will also need a wallet button holder. They should be about 5 x 5 cm in size and place them both on the left side of the leather. Cut about 1.25 cm from the top and bottom of the section, and cut about 6.35 cm between the two buttons.

Glue the bag to the body of the wallet with duct tape or a needle temporarily. Place the card pockets on top of each other so that only 1.25 cm of each top is left. Place the change bag in the middle of the top left of the wallet body. Use duct tape or a thick, sharp pin to hold the pockets in place.

Punch holes in the leather. Stitch the bag with the bottom. Thread the wax-coated sewing thread into the needle, and stitch each pocket to the body of the wallet. Stitch the bag by tucking the thread in and out of the holes you made with the rotary punch. Start on the inside of the wallet to hide the sewing knot. The inside of the wallet is the part where the pocket points up. Do not sew in areas too close to the top of all pockets.

Attach the wallet button. Using your rotary punch, punch holes on both sides of the hook of the wallet by pressing them where the pins are indicated. Attach the buttons to your wallet using a hammer. Sew the parts of the wallet together. Sew it, start on the inside of the purse, with pockets facing up, to hide the knot. Sew around the wallet twice using waxed thread to make it stronger. If you want, you can also use the veins to sew along the outside of your wallet.