MKS INDUSTRIAL SOLUTIONS
An industrial dryer is an essential part of most material processing procedures, but they are typically a large capital expense and can last for decades. This makes picking the best dryer for your processing needs especially important since picking the wrong dryer can have long term negative consequences for both material quality and company finances. With numerous types of industrial dryers available, all with their own unique pros and cons, this can feel like a daunting task.
Types of Dryers:
Source: https://www.mks.co.in/dryers/
The Ring Dryer is a special development of the Flash Dryer Incorporating an internal airborne recycle For greatly improved operation and efficiency. Our designed of Ring Drying System consists of a “manifold” or “internal classification which differentiate it from flash dryer The Internal ‘circulation in the Ring Dryer, which is of the manifold, a special centrifugal classifier designed to separate dry and fine particles.
While holding large moist particles in prolonged circulation this enables the Ring Dryer to process many materials that were earlier considered difficult to dried with the help of a Flash Dryer efficiently and also to obtain exceptionally good control of the final product moisture content.
MKS Ring Dryers are the most efficient Dryers for drying DDGS/DWGS of distilleries. The Ring Dryer is a special development of the Flash Dryer Incorporating an internal airborne recycle For greatly improved operation and efficiency. Our designed of Ring Drying System consists of a “manifold” or “internal classification which differentiate it from flash dryer The Internal ‘circulation in the Ring Dryer, which is of the manifold, a special centrifugal classifier designed to separate dry and fine particles.
Spray drying is considered a powerful technological process since it brings feasibility to the production of free-flowing particles with well-defined particle size. The scalability and the cost-effectiveness of this manufacturing process in obtaining dried particles in submicron-to-micron scale favors an increasing variety of applications within the food, chemical, polymeric, pharmaceutical, biotechnology and medical industries.
Our flash dryer system is an inexpensive solution to drying powders and granular materials, and is designed for high moisture materials with a constant-rate drying zone and can use higher gas temperatures, versus other dryer types, because the material retention time is very short. Drying takes place in a matter of seconds.
Rotary dryer is a kind of drying equipment for processing, vast range of, large quantities of materials. It has characteristics of reliable operation, large operation flexibility, strong adaptability, large processing capacity, strong adaptability of materials, drying of various materials.
We design Fluidized Bed dryers for food and dairy, chemical and pharmaceutical industries. Fluidized bed drying is the optimal method for controlled, gentle and even drying of wet solids. The intensive heat/mass exchange of the fluidized bed product makes this method particularly effective and time-saving. The technology is also suitable for post-drying of spray granulated or extruded products with very low residual moisture.
This technology is applied for drying and/or cooling for production of agglomerates and granulates from fine powders.
Our Fluid Bed dryers are all designed for our clients’ specific purposes, matching the industry specific standards and requirements.
An EPC based organization provides engineering services from feasibility studies to designing the world’s most advanced industrial engineering technologies to the global industrial market.
We ar...
