Betgratis

How to Build a Poker Ferry

The Poker betgratis Ferry is a great little fishing craft that I came across on eBay. It's small enough to fit in the trunk of your car, and looks like a toy truck, so you can drive it anywhere you want.

This craft can be used in a number of places where area water is abundant. For example, it can be used for trolling, fly fishing, ice fishing, or even just to simply float. Once you get the hang of it, you can make it do anything.

If you don't have any blueprints, don't worry. These types of boats are not difficult to build. You will be happy you did, because you will save so much money on fishing and other fun activities!

There are three major parts to building this boat. They are the hull, the mast, and the winch. The vessel is no more than 40 inches in width, so if you plan on buying one, you'll only need to build one more part.

If you buy a small plastic model of this craft, it can act as a guide. Take the tiny plastic boat, and slide it into the base of the boat. Here is a picture of what the inside of the body looks like.

When you are finished, it should look like this. Before you use it, make sure to get some torque out of the propeller by disconnecting it from the motor. This is important because the rotational weight of the boat on top of the motor is what causes the propeller to spin.

Now, if you have never done this before, you might have to do some jumping through hoops with your hands, but I will show you how it's done. Slide the motor and the propeller from the boat onto the other parts. Try and hold them in place with your hand and tape them down. This is to prevent water from getting in between your hands and causing the water to make it slip.

Next, you will have to get your winch off of the motor mounts and secure it to the shaft on the back of the mast. This is really simple and will not take long.

Lastly, you will need to get the shaft off of the propeller. Hold the tips and rotate them clockwise until they are out of the way.

The inside should look like this. It's important to use some screws to hold the body together. They make a good shield against water getting in between them.

Now all you have to do is take the body off and connect all of the electrical outlets and any other connectors you may have. Also, make sure that the motor mounts are securely on the shaft and to attach all of the attachments, such as the electric plugs and handle grips.

Now your boat is complete! What a way to be able to fish from your own boat! It has many different uses and can fit into many situations.