Superfab

Cable management systems are essential part in any industry that has loads of loose wires to be managed. When it comes to cable management, it is not just about selecting the right cable tray but also choosing the right material is also equally essential. For any given industry, depending on the environmental conditions, fitting requirements, durability aesthetics and cost, one should select electrical cable trays for their industry. However, cable tray as such comes in a wide variety of materials. So, one needs to even consider what to buy depending on the need of the industry. Today a large number of cable tray manufacturers in India are offering a range of cable tray system made of various materials. Some of them include stainless steel, galvanised steel, aluminium; GRP and Plastic to name a few that are commonly used for cable management industry.
Every material has their own benefits and deemed suitable depending on the requirements of the industry. Stainless Steel cable tray (SS cable Trays) is a popular choice as they can be used in various equipment’s across industry. Available in varying grades of SS cable tray, they are used in installations for standard factory builds to harsh environments of chemical and offshore. SS cable trays are the best material grade for they have a superior resistance to corrosion as well as known for their durability and resistance. Provided these stainless-steel installations are maintained rightly, they are highly unlikely to be replaced for many years to come.

On the other hand, Galvanised steel is highly reputed for its excellent durability and reasonable cost. However, considering its longevity, galvanised steel’s zinc oxide coating tends to eventually wear off leaving it exposed to corrosives and harsh weather conditions. Hence one might have to consider this factor before investing in GI cable tray system. For projects that are tight on budget plastic is said to be a cheaper alternative to metal. However, with plastic you would need to replace them regularly for the lack of its robustness and durability. In fact, this results into plastics being more expensive considering the costs incurred to replace and fit the new ones. One must consider various factors before finalizing or selecting the one that best fits their bill. Ideally you must consider the following factors while selecting a cable tray material.

• Whether the material is corrosion resistant
• Their Ultimate Tensile Strength (MPa)
• The frequency of replacements required for the equipment
• How ease they are for cleaning
• Consider whether they are suitability for harsh environment
• Whether they are suitability for certain critical environmental condition
• Consider the aesthetic of the material
• Whether or not the material is recyclable/reusable

Taking all of the above factors into consideration you must make a choice of cable tray that suits your requirement. Every industry has its own requirement when it comes to cable management. So, depending on the industry, their requirement and feasibility, one can opt from the above-mentioned type’s materials for installation of electrical cable trays.

Electric wires and cables need to be carefully handled for they could cause short circuit in the vicinity. Any amount of loose cables and wires at workspace or industry can be risky if not insulated well. For safety and protection of these cable wires, investing in cable tray is absolutely essential. These equipment are designed by cable tray manufacturers specifically to protect and prevent any damage to the wires. So, be it any industry or corporate workspaces having large amount of heavy-duty cables before laying them down, the electricity lines are protected and supported by installing cable tray systems. Tray cables are applications that provide an effective solution for electrical lines and various other power cables in plants, facility centres and IT offices.

There are a number of benefits associated with installing these cable trays. Here are some of the benefits briefly discussed below-

Advantages of Cable Trays:
• Cable management system-
Cable trays are systems designed to support protect and manage cables and loose wires. In any given industry or firm having large amount of heavy-duty wires lying in the vicinity can be dangerous. It could not only cause the risk of short circuit but also risk the lives of people working there. Besides having loose wires strewed around makes the place looks shabby. Having cable trays in will not just facilitate cable management but also make the vicinity safe.

• Economic solution for safeguarding wires-
Electrical cable trays are the most effective and economical way of safeguarding industrial and commercial cable or wired installations. Reasonably priced these robust equipment offer exceptional support and protection to cables. Moreover, they are highly flexible systems that can easily adjust to complex configurations and far more superior than other systems.
• Good alternate to conduit system-
One of the major benefits of cable trays is that they are a far more superior equipment than conduit system. They are today considered the best alternate to conduit system for cable trays are easy to install, and a highly flexible system. Not just that, they are easy to maintain equipment costing less maintenance and low labour cost. Further, these cable trays provide greater strength in comparison to a conduit system or any other wire trays.
• Good support and ventilation-
The cable trays provide good support to cable wires and some additional space for extra cable carriers to be fit in. It also provides good ventilation system that facilitates air circulation. This prevents the machine from getting heated up and damaged. So, with the combined features of good support and ventilation it makes an ideal protective equipment for loose cable wires.

• Highly flexible system –
Cable trays are highly flexible system that can easily adapt to any complex configuration quickly. Installation of this equipment is simple and hassle free compared to any other system. Besides they are designed in a way to provide strong ventilation and support for the cables in which they are installed. Moreover, since it is less labours to use cable trays, they turn out to be the best equipment for any industry in need of a cable management system.

Introduction
Electric wires and cables need to be carefully handled for they could cause short circuit in the vicinity. Any amount of loose cables and wires at workspace or industry can be risky if not insulated well. For safety and protection of these cable wires, investing in cable tray is absolutely essential. Cable trays are instruments designed to protect and support cables in the industry. Cable tray manufacturers specialize in developing electric cable tray systems that are used by most industries. So, when laying down large number of heavy-duty cable wires on the shop-floor or in an industrial plant, tray cables are installed to insulate the cables and protect them. But what really makes this equipment so popular in comparison to other similar equipment’s? Let us today understand why and how installation of cable tray systems can work out to be reasonable investment for protecting cables.
Benefits of using Cable Trays:

• Cable trays are probably the most cost-effective solution for protecting cable wires in an industry. In comparison to other similar system like the conduit system, cable tray works as an excellent alternative to support cable wires at a nominal cost. One of the main reasons for tray cables to be cost effective is low labour cost. The system is designed in such a way that parts of it are easy to assemble and hence it does not involve much labour work. Installing of a cable tray doesn’t require additional accessories for re-drilling or cropping of the equipment. It therefore makes it cost effective and easy to install equipment.
• Cable trays are built strong and sturdy to effectively support and protect heavy-duty cables. Further, their design allows tracing of faulty cables, if any and facilitates quick and easy replacement. Moreover, cable trays provide greater strength in comparison to normal wires trays. Hence, they seem to be a more viable option than any other type of cable management system.
• Equipment’s like the tray cable requires minimum space for installation. Besides they provide enough space for ventilation of cables, thus limiting the chances of overheating. Moreover, cable trays come with slots that provide extra cable carriers to be fit in. So, overall, the equipment facilitates extra space capacity to hold on additional cables while also ensuring they do not get cluttered or tangled in them.
Conclusion-
Going by the benefits that cable tray offers as mentioned above, they seem to be the best equipment for cable management in a given industry. However, depending on the industrial requirement one may opt for the right type to best fit their application. In general, there are types of cable trays that cable tray manufacturers in India supply. This includes the ladder type cable tray system and the perforated cable tray system. These cable trays are specifically designed to meet the indoor requirements of cable management in the industry. GI cable trunking manufacturers have also come up with the provision of manufacturing galvanized cable trays that are suited for outdoor application. So, based on the industry use, application and feasibility, opt for cable trays to manage protect cable wires in the industry.

Have you been looking for ways to deal with electric wirings in your industry?
If yes, then here is an amazing equipment called the cable tray system that can help you deal with large amount of loose cable wires. Cable tray systems facilitate neat and organized way of managing cables in the industry. The equipment serves as an easy option to get the wiring compiled neatly in an industrial set-up where a lot of cable wires are left loose and unattended. Leaving the wires or cables unprotected can be a huge risk to the property and people working in the vicinity. A short circuit can lead to a disastrous loss of life and can even lead to operation failure.

Which type to pick for your industrial needs?
Looking for cable management system means you have many options to choose from when purchasing a cable tray for your industry. However, one should understand what best suits your system and the environment when selecting a cable tray. Tray cables in general are constructed with a solid-bottom which provides better protection from various exit cables that are may project out from it. Using such systems may ensure better protection. These heavy-duty cable trays are well-ventilated and provide a perfect way out to create a mesh in which one can fit the complex wiring systems neatly. This will help you keep all the messy wires well-organized and truly hold up all the loose wires together systematically. The tray provides good spacing and ventilation in between thus ensuring no risk of short-circuit or the possibility of overheating. Cable trays in general come in different variant namely ladder type cable trays, perforated cable trays, wire mesh cable tray systems to name a few. Ladder tray is the most common and the most economical type of tray, known for providing maximum ventilation for cables.

Cable tray manufacturers in Mumbai offer robust cable tray system using the finest quality raw material for efficient cable management. The system designed is used in various industries for distribution of power throughout the premises. Ladder cable trays are systems that consist of two longitudinal side rails or rungs, which are welded to the side rails or bolted in some cases. This type of cable tray provides maximum ventilation to heat producing cable such as power cables. These Ladder trays are designed carefully keeping in mind industrial requirements. These Ladders are available in standard length of 2500mm and also width ranging from 150mm to 1200 mm and height ranging from 50 mm to 150 mm.

Features of Cable tray system-
• Cable tray systems are designed and manufactured using high grade raw material.
• These electrical cable tray facilitate high quality industrial grade strength.
• They are the best cable management systems that are highly durable and offer a robust design.
• The tray cables are easy to use and install, offering best cable support to wires in the industry.
• Cable trays are available in a wide variety for light duty, medium duty, and heavy duty applications.
• What makes it more special is its excellent on-site integration & safety.

Introduction
Industries looking for a cable management system often get confused by the variety of options they get for managing loose cables. While design and features form a major portion, the cost is also a major factor from a purchase point of view, when selecting a wire management system. Organizations often prefer a cable tray system that is robust and yet cost-effective. In this article today we have discussed how and why is a cable tray system considered cost-effective when compared to a conduit system. This article provides information as to how cable tray systems help save costs.

Product Design helps save cost-
1. Cable tray systems are designed simple yet effective for managing cable wires. The wire management system simplifies the complexity of managing a large number of wires in the industry, requiring fewer elements or equipment for installation. Comparatively a Conduit system is very complex and requires several elements like pull boxes, splice boxes and requires several other support elements for installation making it overall very expensive.
2. Cable tray systems are small and compact requiring lesser space for installation in comparison to a conduit system. This eliminates the requirement for the demolition or building space for the system. Besides these tray cables fit the dynamic and growing needs of the industry thus reducing the cost of purchase of additional supporting equipment.

3. The design time required for a cable tray system is a lot less than a conduit system. This saves time and money invested in developing the system for the industry. Besides cable trays are more flexible by nature which makes it more desirable.

Material Procurement saves cost-
Cable tray systems in general require a lot less components than in a conduit wiring system. This saves a lot of money due to fewer components required to be installed and maintained. It literally helps save up to 80 percent as compared to the cost of conduits and its support equipment like the junction boxes, pulls boxes, etc.

Installation saves cost-
1. The installation of a cable tray wiring system requires a lot less manpower than required for a conduit wiring system. This is where one can see a major cost-saving.
2. Further, cable tray systems can be installed faster than conduits for they are simple in design. This saves a lot of time and money required for installing the equipment.
3. Moreover, there are a lot many individual components required in a conduit system than in a cable tray system. This results in requiring a large number of labors for handling and installing conduit systems as compared to a cable tray system. Besides the installation of a conduit system is a lot more complex and costly requiring a good investment of laborers to achieve installation.

Maintenance cost
Cable tray systems are not just easy to use and install but are equally easy to install. These equipment are specially designed resilient to any external environmental effect and corrosion. They are typically resistant to moisture, or any chemical reaction or harsh environmental conditions. So, it typically makes them a lot easier to maintain. The cost required to maintain this equipment is thus a lot less making it more affordable or cost-effective.

Introduction
Cable tray systems are equipment that makes for a perfect cable management system in the industry. It protects wires from the harmful environment, dust, duct, or any other chemical. Further, it prevents incidents of fire-shock, overheating, and other problems. It is the best solution that is used for supporting and protecting the wires in an organized manner. Cable tray manufacturers in India provide a wide range of cable tray systems for industries to address these issues of cable wires. These tray Cables are available in different finishes like hot-dip galvanized, Pre-galvanized, powder-coated, painted, etc. Galvanized perforated cable trays are one such type of cable management systems that are heavily used in the construction industry.
What is a Galvanized cable tray?
Galvanized cable trays are equipment’s powdered coated to prevent systems and cables from corrosion and heavy damages. Generally, people opt for cable trays that are designed and made of stainless steel or aluminum. However, GI Cable Tray is much stronger for they come with a layer of a thick coat of aluminum or galvanized. The thick surface coating typically protects wires against corrosion and such other issues. Galvanized perforated Cable Tray manufacturers in Mumbai develop strong and sturdy equipment that works just perfectly for any industry and helps protect cables even in the most adverse condition. After all, the product can withstand any condition. It is high in demand product used worldwide and easily available in the market at an extremely affordable cost.
GI Cable tray systems facilitate a hassle-free performance and are known to contribute to increased productivity and business safety. All one needs to do is purchase the equipment from a Galvanized Cable Tray Manufacturers in Mumbai. Depending on your industry need, they can be customized to meet your demand and will require no additional investments for regular maintenance. Consult with cable tray manufacturers in India to learn what best suits your industry and can handle the environment, in which they would be installed.
Benefits of GI cable tray systems-
• GI cable tray systems are sturdy robust equipment’s perfect for managing cables.
• Protects cable wires from overheating, fire & possibility of shock circuit.
• Provides good ventilation for wires/cables in which they are installed.
• Prevents the possibility of corrosion due to extreme environmental conditions.
• GI cable tray manufacturers in Mumbai provide affordable cable tray systems.
• It is perfect equipment designed compactly to fit any industry set-up.
• The cable tray systems are available in a wide variety including, ladder type cable tray and perforated cable tray.
• They are sturdy cable trays systems that are suitable for heavy-duty cable wires.
Conclusion-
If you consider the design, structure, and the benefits that GI cable trays offer, they seem much more reasonable and suitable for any given industry looking to have cable management systems. Consult a reputed cable tray manufacturer in Mumbai to understand what best suits your industry and you are sure to be recommended the best equipment for your business.

Introduction
Cable tray systems are gaining huge popularity in many industries today. It is today considered an essential part of cable management for most industries. Witnessing the growing demand of cable trays brings me to writing this article on the cable tray systems and the reasons for their growing demand. This article will highlight some of the top benefits of availing cable management systems from cable tray manufacturers for your industry.

Cost-effective-
One of the top reasons for a cable tray system's growing demand is that it is reasonably priced in comparison to other cable management systems. Not only are these tray cables effective systems for cable management, but also reasonably priced. So, for those looking for a cost-effective option to protect their wires, cable trays are the best choice. Their demand in the industry says it all.

Reliability
Cable tray manufacturers in India often vouch for these systems over others in the industry. The only reason for this is their durability and efficient design that makes them reliable. Cable trays are systems that are much more reliable than some of their counterparts like the conduit system. The cable tray systems are designed flexible, easy to use cable management products. Moreover, it is a system that can be placed anywhere in the industry.

Highly Adaptable
Cable trays are highly adaptable equipment used as cable management systems. Designed highly adaptable and sturdy, the systems can easily fit into any industrial, mechanical, and electronic set-up. Their robust features make them highly suitable for any industry and which is why they are very popular cable management systems across different industries.

Easy Maintenance
Cable management systems are efficient and easy to use equipment for a given industry. What makes it so special is that it is not just easy to use and install but also easy to maintain. Especially in comparison to conduit systems these equipment need no extra care or checks for maintenance. Moreover, they are long-lasting systems perfect for rough use.

Provides Safety
A cable tray system is less vulnerable and hazardous than a conduit system. So, while a conduit can build up moisture over time cable tray system is designed resistant to moisture. In fact, not just moisture but they are also resistant to heat and can provide good insulation to cables. In general cable tray systems are resistant to heat moisture chemical and extreme environmental conditions as well. This makes it the safest and best choice system for most industries.

Cable tray systems offer a safe structure for a dispersed wiring distribution system. If wires are not installed and maintained properly in the cable tray may pose a huge threat of fire, electric shock, and sudden blast events. It is therefore essential to ensure that maintenance, installation, and inspection are dully conducted to address these concerns. In today’s article, we have discussed how cable trays can be well maintained and installed.
Precautions to be taken with Cable tray systems
• Cable trays are systems that need to be properly fitted and supported as per the installation instructions provided by cable tray manufacturers.
• Ensure the tray cables are not overloaded as it could lead to a breakdown of the tray.
• Overloading of a cable tray can be hazardous for people working around it and may possibly even lead to electric shock.
• Cable trays used in hazardous locations must be validated for their suitability for use in such locations. This is mainly because often excessive heat build-up may cause the insulation to break down and lead to shock and fire.
• Electric Cable tray systems must essentially be grounded for safety and protection against arcing that may possibly occur in the wiring system. They should be appropriately grounded and tested before cables are installed and energized.
• If correctly installed, these systems can possibly provide rigid support to the structure for a long life span.
• Cable trays under normal conditions need no maintenance. However, we suggested a periodical inspection of the cable systems to keep a check on its performance. Even visual maintenance can be sufficient.
• If the trays are subjected to unusual weather patterns it is recommended that an inspection be carried out.
• Ensure that the maintenance function is performed by qualified personnel.
• Ensure you remove inactive cables left in the tray system and create space for other cables to improve ventilation.
• In case an existing cable tray, support gets damaged, corrective measures and maintenance should be undertaken immediately. Further, it is recommended that the section be replaced to maintain the overall integrity of the installation.
• Cable tray manufacturers too recommend that at least once in a while the cable trays must be cleaned and maintained for better efficiency.
• While cleaning the installations, avoid using metal scrapers or sharp objects for it can damage the surface of the installation and harm the structure of the trays.
• You can probably use soft cloth or pads to clean cable tray systems.
• Avoid using harsh chemicals on the cable tray systems for cleaning. For instance, using harsh chemicals like chlorine could greatly damage the protective layer of the trays. Using harsh chemicals could also increase the risk of corrosion.
• Ensure that you use the right tool to install cable tray systems. This is essential for it greatly helps in the correct installation and further preserves the protective layer of the trays. Further, it also eliminates the corrosion of the material, thus increasing its life span for years.

Introduction
Unprotected wires and cables are a huge threat to an industry. There is a huge risk that comes with it when cables are left unprotected. Loose wire leads to damaging your workplace or pose a risk to lives of people working around it. A cable management system like a cable tray system will work wonders to address these issues. Most industries have wires and cables left in the open which needs to be well managed. Cable tray systems can help industries tackle this daunting task especially with ease. Cable tray manufacturers offer a wide range of solutions for managing the wires in an industry effectively. But selecting the best cable management systems is a major concern. For such purposes, cable trays are the most reliable solution. They are systems designed to manage the heavy duty wires and cables with ease. In today’s article we as a cable tray manufacturers in India have explained the purpose of installing cable tray systems in the industry.
Advantages of Installing Cable Trays

Cable trays are the most versatile piece of equipment designed by heavy duty cable tray manufacturers as an ideal cable management system. Here are some good reasons why one should opt for tray cable installation in their industry or vicinity holding heavy duty cables.
• Good Cable Management Systems- Cable trays systems have the ability to manage the various types of wires and cables in the industries. They are durable and reliable enough to manage the entire system alone. These equipments are the most versatile systems ideal for cable management.
• Numerous benefits: The cable trays are tough, sturdy and reliable systems that ensure the safety of the workplace as per the industry requirements. They are easily adaptable with the indoor and outdoor applications and also require bare minimum maintenance throughout its lifespan.
• Economical systems- Cable tray systems are very economical in comparison to other cable management systems. Especially in comparison to other alternative like conduits or raceways, you will find cable trays cheaper in terms of design, fitting, and maintenance. Moreover, you will find a wide range option for various industrial needs at very economic price range.
• Easy maintenance- Cable trays are systems designed strong and durable. They are made of high quality material that prevents corrosion, damage and other problems relating to moisture etc. materials like stainless steel, provides great strength to the products and also provides an overload bearing capability. Further, the stainless steel material of tray cables offers excellent corrosion resistance properties. So, maintenance of this equipment isn’t really a big deal.

• Value for money- For the cost that a cable tray is available and for its effective utility and low installation and maintenance cost, cable tray systems are an ideal option. They are equipment’s worth installing in any industry without having to fear of its capability and usage. They are value for money cable tray equipment’s that can be used in any industry or commercial sites.

Introduction
Wire mesh cable tray which is also known as a basket cable tray is a type of cable management system made of stainless steel cables. The system is designed by welding together stainless steel cables in the form of a basket-like mesh. Lately, it is noticed that wire mesh cable trays are gaining more popularity in the market. Clients have been demanding wire cable trays from cable tray manufacturers which clearly signs that this type of cable tray has won more clients in the cable management industry. So, let us today learn what makes the system so popular in the industry.
Cost-effective-
Wire mesh cable trays are cost-effective and require less steel than other types of tray cables. The design of the wire mesh with openings requires a lot less raw materials to manufacture, which is reduces the overall manufacturing costs. Considering the most common or rather in-demand cable tray size 300mm x 50mm, the standard wire mesh cable tray having wire width 5.0mm will weigh 2.19kg/m in comparison to channel cable trays with material thickness 1.0 mm will be about 3.1kg/m. This saves on the material cost required for the cable tray system. The benefit of cost saving is passed on to the customers. Besides, wire mesh cable trays in general are less expensive.
Better support range-
Unlike the channel cable tray or the ladder cable tray which provides an approximate 1.5m supporting range, a wire mesh cable trays can provide 2.0m at full limit. This reduces the overall establishment costs. They are typically used for low voltage, telecommunication, and fiber optic cables supported on short spans.
Solution for any industry-

Cable tray manufacturers in Mumbai design tray cables that can practically be used in any industry. This would include fiber optic installations in data centers, data cabling in offices, manufacturing, or harsh environment industries such as oil and gas. The Wire mesh cable trays are available in different options to include galvanized, hot-dipped, stainless, polyethylene, etc. to meet any project requirements.
Easy and Quick Installation
Wire mesh cable trays are lighter in weight and designed dynamically by cable tray manufacturers for easy and quick installation. They can easily be installed by an individual and will take less time for installation in comparison with other cable tray systems.
Adaptable Cable Management
Wire mesh cable trays are designed as flexible and dynamic in nature. Being an open structure provides them an easy exit. What's more, the wire mesh cable trays are more adaptable to different and complex conditions making them the ideal equipment for even the most complex environment.
Better ventilation -The ventilation limit of wire cable trays is far more superior to a perforated cable tray offered by a perforated cable tray manufacturer. Due to their open structure, they are generally the best equipment for heat ventilation.
Appropriate against fire hazards
Cable tray manufacturers in Mumbai develop wire mesh cable trays that chemical, moisture resistant and also ensure the appropriate working of the system in an event of a fire. What's more interesting is that since they are an open structure, the cable trays would ensure smoke alarms and fire sprinklers would not be impeded.
Simple to Maintain
Since wire mesh cable trays are an open structure, it is easy to discover electrical and correspondence issues. So detection and fixing of issues are a lot easier with wire mesh cable trays which help us conclude that cable trays are easy to maintain.

Introduction
Wire mesh cable trays are systems gaining huge popularity in the industry over the years. Today, the equipment is the most preferred choice of installers, integrators, and organizations needing cable tray systems. In today’s article, we have discussed some of the benefits of using a wire mesh cable tray. Let us through this article understand how and why is a wire mesh cable tray better than a conduit system.
Cost-effective
Wire mesh cable tray systems offered by cable tray manufacturers require less raw materials for the nature of their design and less manufacturing costs. Compared to the solid steel tray or ladder cable tray, wire mesh requires a lot less steel which saves your overall cost.

A perfect solution for all industry-
Be, it any industry, wire mesh cable trays are manufactured in a way that suits any industrial environment. They are equipment’s available in different variants including galvanized, hot-dipped, stainless, polyethylene, etc. to meet the requirements of the industry. These pieces of equipment are designed to be resistant to harsh environments and even oil and gas. They are probably the only type of cable tray system that can be customized on-site as per requirement. With simple tools, the cable tray can be easily cut and bent to meet the exact requirements.

Quick and Easy to Install
Wire mesh cable trays are designed simple with a variety of mounts, brackets, and supports for quick and easy installation. Cable tray manufacturers develop the equipment in a way that can be installed in any environment. Besides they are lighter in weight which makes it easier to ship, store, transport to the site, and even customize them. Further, technicians working on it often prefer lighter-weight solutions to deal with.
Flexible Cable Management
The wire mesh cable trays are highly flexible equipment’s in comparison to their counterparts. They provide a variety of options for cable management which is essential for frequent entry and exit of cables. This feature makes them a much better option than a conduit system.
Heat Dissipation
Wire mesh cable tray provides a special feature of heat dissipation. Due to its wide and open design, the system allows heat to easily be dissipated. This ensures better performance of the equipment and safety of the cables in it.
Easy to Troubleshoot
The open design of the cable tray system makes it easy to quickly visually identify issues when the system is not working. It is a lot easier to identify issues with cables, trace lines, or partially or fully remove a line.
Accessories
The cable tray comes with a wide variety of accessories that are often offered by cable tray manufacturers and includes covers, bolts, splices, clamps, grounding lugs, brackets, angled brackets, mounting brackets, wall brackets, trapeze, horizontal and vertical supports, junction boxes, j-hooks, intersections, t-way, vertical bends, vertical drops to name a few. Depending on your project requirement you can benefit from these accessories that help support your systems.

Introduction
Cost plays a very crucial role in considering or even adopting a cable management system like even a cable tray or a conduit. For any given project, the cost and feature of a product should be carefully evaluated prior to the selection of a system that best fits the industry requirement. This should typically include the relative cost, dependability, future changes, maintenance, safety, and space savings. Depending on the features and reasonable pricing one may determine the feasibility of a system for their industry. In today’s article, we have covered information on cable tray systems and the cost benefits involved in using a cable tray system as cable management equipment.
Cost benefits of cable tray systems
Design Cost- The design of a cable management system is crucial at any given point in time in a project. More than often, the designs vary from what was earlier defined at the initial phase of design. As a project progresses through the phase, the operating logic and safety requirements tend to refine the overall design. The alterations and additions as per requirements change the overall blueprint and, the cost time consumed for implementing them during the engineering and drafting design phases. However, with cable tray systems it is a lot easier. Cable trays are uniquely designed and feature that allows a cable to enter or exit a cable tray anywhere along the cable tray’s route facilitating easy accommodation of cable additions. But that isn’t the case with its equivalent conduit system or raceway wiring system. With conduit systems, any additions or revisions will require the engineers to provide exit and/or entry points in the conduit runs for additions made at the later phase of design. Cable tray systems are designed simple and will require less or few alterations in case of a design change. Overall the cable tray wiring systems require less design time than what is required for a conduit system.
Material Procurement cost- The cost of the cable tray, its supports, and miscellaneous together may facilitate an overall 80% of material cost saving compared to the conduit system. With cable tray systems there would be lesser additional components required that saves your overall cost. For instance, in the case of a feeder or branch circuit wherein an installation may involve parallel phase conductors, there is a huge benefit with a cable tray system for it facilitates copper cost savings in this wiring system.
Installation Cost - The installation of a cable tray wiring system is very simple. It barely requires skilled labours to get them installed as compared to its equivalent conduit wiring system. Here there is a huge cost saving with not much labour required for the installation process. In a conduit system, several individual components need to be assembled for final installation which makes the overall process cumbersome. This will require huge manpower requirements and an overall increased amount of time and money invested in installation. Besides cable tray systems are quicker to install for their well-designed features. Moreover, with the Conduit systems, the materials and installation practices are a lot more complex and expensive. Conduit systems normally require more supports which makes the entire process labour-intensive practice and a costly affair. For these reasons, cable tray installation labour costs are significantly lower than that of conduit system installation.
Maintenance Cost - Cable tray systems are robust and sturdy equipment that requires bare minimum or no maintenance. They are designed moisture and corrosion resistant which prevents any damage to the system in general even if installed or exposed to any harsh environment. Besides their design which eliminates the need for alteration, prevents damage to the system when adding additions to the systems. Overall, the cable tray systems offer dependability and safety benefits over conduit wiring systems.

Introduction
Businesses looking for an economical arrangement for the messy wires must consider cable tray systems. To avoid or limit the cost incurred on the wire management system and limit the mishap caused due to the messy cables, the cable tray system is the best option. It is a cost-effective system that is best known for its various features. While selecting an effective cable management system, you should consider several factors such as its reliability, durability, and being value for money. So with this article, you will know why one should select a cable tray system over other wire management systems. Consider the following points before you plan to invest your time and money into it for your systems and infrastructure.
Easy to install- Installing a cable management system that is easy to use and install should be one's top priority. This saves a lot of time, money, and efforts that you may otherwise will need to invest in setting the installment and working on it in the future. Cable trays are a system that is easy to use and install. Besides they are designed in a way that requires less maintenance which makes them the best choice for any industrial, business, or corporate setup that requires cable management.
Reliability: The system you are considering installing should be safe and reliable. The system should deliver minimum downtime. With Cable trays, these systems are not just easy to install and use but they also keep the wires safe and offer you ample storage.
Adaptability: The system should adapt to your requirements and surroundings. The product you plan to consider for installing must also be adaptable to the weather conditions of the place to avoid hazards. Having an adaptable product should be your choice for it makes it easier for you to manage and deal with cables better.
Cost-effective: This goes without saying that the cable management system you need to consider should be cost-effective. The output delivers for the cost invested on it should be much higher. The equipment must be value for money taking into account the installation, maintenance, repairs, downtime, etc. Having a product that is easy to install and requires less maintenance is preferred by most industries and this can only be achieved with the cable tray systems. They are designed robust and dynamic which makes them the best and the most preferred choice in comparison with other systems.

Introduction
Cable tray systems play a significant role in the most industry with electrical setup. They support digital infrastructure having numerous cables in the vicinity. These cable trays are used in such an industrial setup for managing loose cables. Available in different varieties ranging from Ladder-type, perforated type, Solid bottom type, Wire mesh, and Channel type these trays work wonders for managing cables. For businesses having a tough time deciding on which cable management works for their industrial set-up, then there are certain points to be considered before purchasing. Since many factors affect product quality, here are some points to consider the following points before processing.
Reliability- The unmatched reliability of the cable tray makes it the best cable management system for any industry. It is a product designed well and reduces the possibility of frequent maintenance and downtime. Again since the product is easy to install, cable trays are preferred over other cable management systems. In addition to this, it also eliminates moisture build-up and cable insulation damage during installation.
Cost- There are a variety of manufacturers in the market offering a large variety of cable management products at amazing prices. However, low price comes with a cost of low quality. But when it comes to cable trays, although they may be a little expensive yet overall since they reduce the overhead costs and maintenance costs they work u to be reasonable.
Maintenance- Frequent maintenance can be very expensive for any business. So, keeping that in mind it is only sensible that one purchases a product that is low maintenance cost. So with that said, cable tray systems are definitely the best option. They hardly require any maintenance and have a long last shelf life. So most industries prefer cable tray systems since they are easy to use, install and maintain. Moreover, products that are designed robust needing less maintenance are less susceptible to fire damage than catheters and other wire management systems.
Safety- Safety which is a major concern for every small and large scale industry, looking for a cable management system that is secure and safe to use is the priority of any business. Having said that, compared to other systems, there are fewer safety issues with the cable tray systems. The cable tray manufacturers design safe and reliable cable trays that are suitable for any given industry. The system is safe and reliable while providing good ventilation for the wires stored inside. With ample amount of space availability to add more cables and good ventilation makes it ideal and safe equipment for any industrial set-up or environment. Besides due to the open structure of the tray, it can also withstand overload. Also since they are moisture-resistant these cable trays are a safe bet for the cable management system.

Introduction
Cable tray manufacturers offer a wide range of cable tray systems designed to the highest quality. They are the most popular cable management systems in the industry having the ability to secure cables in an industrial setup. Most industries prefer cable trays over other equipment like conduits for their industry. In today’s article, we have explained to our viewers why we believe cable trays to be the best equipment to protect your cables. But before that let us explain what a cable tray system is.
What are Cable Trays?
Cable trays are equipment designed to provide mechanical protection in an industrial environment where large quantities of power control cables are in use. Besides protecting cable, they are also designed to facilitate a perfect routing path for the power cables. The cable tray manufacturing industry offers a variety of cable trays in different materials. Cable trays are available in galvanized steel, aluminum, stainless steel, and glass-fiber reinforced plastic. Businesses have to decide which cable tray material suits their business based on the usage and installation environment. Businesses must take into account electrical considerations, environment, corrosion factors, and even cost.
Why is Cable Trays the best Protection equipment for Cables?
A cable tray is the most effective and economical way of safeguarding cables in an industrial and commercial setup. Moreover, these robust tray offers complete support and transportation of cables. They are flexible products that can easily adjust to any complex configurations as required. Given below are some listed reasons that make it the best equipment in the industry.
Flexibility
Cable trays are flexible and can adapt quickly according to specific requirements. Businesses will hardly face limitations when it comes to the installation of cables. This is because the equipment is designed versatile providing strong ventilation for cable. Installing these trays is a lot easier in comparison to conduits, requiring less labor.
Reliable Product-
Cable trays offer great reliability. They are very durable and can last long. They provide complete protection against damages, ensuring the wires and cables last longer. They provide unmatched reliability which is very important in an industrial setup. Since they are corrosion resistant and it provides good ventilation they do not pose a problem of moisture build-up. For all these reasons they make for the most reliable option for industries.
Highly Adaptable –
Cable trays are designed highly adaptable providing great safety, storage, and ventilation to cables that ate installed in them. In today’s evolving landscape demand for systems that adapt quickly and efficiently is the need of the hour and cable trays best fit this requirement. They are products that offer easy adaptability to new needs and technologies.
Low Maintenance –
Cable trays are low-maintenance equipment. Unlike the traditional conduit systems, cable trays are very low on maintenance. They are designed in a way that even physical conditions can easily be inspected visually from time to time. It is also less prone to damage due to fire for it provides good ventilation to cables. When looking at this product it is a completely maintenance-free product that requires less time and labor.