Omni Controls and Other products

*The Fluke TIX1000 * features enhanced image quality and temperature measurement accuracy that allows you to get 4 times the resolution and pixels than standard

Key feature:

• TIX1000-30Hz Infrared Camera with Super Resolution
• 2 x Rechargeable Batteries
• Battery Charger and Adapter
• AC Adapter
• SD Card Reader
• FC SD Card for Fluke Connect™ (Not Available in All Countries)
• Protective Lens Cap
• Hand and Neck Straps
• Carrying Case
• Warranty Card and Safety Instructions

Fluke Oil Dead-weight Tester, 4000 Bar

• Pressure ranges to 60,000 psi (4000 bar. Select from two accuracy classes; 0.02% or 0.015% of reading.
• Includes hand pump and intensifier for generating high pressures
• Tungsten carbide piston and cylinder provides long term stability and durability
• Mass set can be trimmed to local gravity FOC

Fluke Oil Dead-weight Tester, 400 Mpa

This hydraulic tester has mass set that can be trimmed to local gravity FOC.

Features:

• Pressure ranges to 60,000psi (4,000bar)
• Select from 2 accuracy classes; 0.02% or 0.015% of reading
• Includes hand pump and intensifier for generating high pressures
• Tungsten-carbide piston and cylinder provide long-term stability and durability

The Fluke Calibration 653140M Electronic Deadweight Tester Kit, 4 to 40 MPa (600 to 6000 psi) is at home in metrology and calibration labs, on the production floor, or in the field.

Offers Features

• No weights to load and unload, transport or send out for calibration
• Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
• No piston-cylinder changes
• No significant sensitivity to level or vibration
• Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
• Operates in any unit of measure, switching easily from one unit to the next

The Fluke Calibration 653170M Electronic Deadweight Tester Kit, 7 to 70 MPa (1000 to 10000 psi) is at home in metrology and calibration labs, on the production floor, or in the field.

Offers Features
No weights to load and unload, transport or send out for calibration
Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature

• No piston-cylinder changes
• No significant sensitivity to level or vibration
• Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
• Operates in any unit of measure, switching easily from one unit to the next

Fluke Calibration electronic deadweight tester kits feature E-DWT-H configurations combined with the accessories needed for a complete calibration system.

Fluke 6531-7M E DWT Electronic Deadweight Tester, 7 mPa, 1K PSI

Product Highlights:
No weights to load and unload, transport or send out for calibration
Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
No piston-cylinder changes
No significant sensitivity to level or vibration
Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
Operates in any unit of measure, switching easily from one unit to the next

Fluke N5K 6PP42IB Norma 5000 3-Phase High Performance Power Analyzer compact, Includes six PP42 Power Phase Input Modules and an IEEE488/Ethernet interface.

Product Highlights:

Norma 5000 Three phase Power Analyzer
6 x PP42 power phase input modules
Power supply cable
Fluke NormaView PC software
Colour user’s manual
Test certificate
Calibration values

Fluke P3800C Hydraulic Deadweight Tester, 4,000bar, models are available, P3830, P3840 and P3860 offering pressure ranges of 30,000, 40,000 and 60,000 psi respectively (2000, 3000 and 4000 bar).

Product Highlights:

• Pressure ranges to 60,000 psi (4000 bar)
• Select from two accuracy classes; 0.02% or 0.015% of reading
• Includes hand pump and intensifier for generating high pressures
• Tungsten carbide piston and cylinder provides long term stability and durability
• Mass set can be trimmed to local gravity FOC

The Megger BITE 3 Battery Impedance Tester determines the health of lead-acid cells by taking measurements of the most important battery parameters. The BITE3
Category: Other Test Meters & Detectors
Brands:Megger

Product Features:

• Determines health of lead-acid cells
• Measures impedance, interconnection resistance and cell voltage
• On-line testing requiring no downtime and introduces less risk to battery testing
• Provides Pass/Warning/Fail calculations
• Measures float and ripple currents
• Stores results for on-site review to make immediate decisions
• Serial connector allows for uploading of stored data to PC
• Memory holds more than 1 million cells’ data in any string configuration
• Uses Windows CE operating system
• Includes PowerDB LITE Management Software
• Accommodates multiple languages

Product Features: Megger MIT310 | Get 10% off on Omni controls products

• Operates on 250 V, 500 V, and 1000 V test ranges with measuring range up to 999 Megaohms.
• Tests continuity to 100 ohms.
• Selectable AC or DC voltmeter measures up to 600 V.
• Provides clear readout on digital display with large characters and analog arc.
• Tough, rubber-armored casing and self-contained protective cover.
• Extremely easy to use with color-coded ranges to help test selection.
• Continuity and buzzer testing automatically start on connection to circuit.
• Safety interlock prevents unsafe connection of test leads.
• Continuity check prevents continuity or buzzer testing on live circuits.
• Safety lockout inhibits testing on circuits over 50 V.
• Automatic power-off function.
• Weatherproof to IP54

Category: Other Test Meters & Detectors

BUY MORE, SAVE MORE.
Timely delivery with complete tracking

Warranty: As per Manufacturer policy
100% Genuine Product |Brand Warranty | Easy and Secure Payment | Easy Returns

Purchase Fluke 289 FVF combo kit for fast, accurateviewing of measurements, this Multimeter also gives you a practical & affordable approach to predictive maintenance.

Buy Ohaus CS2000 Compact Portable Scale From Omni Controls

The OHAUS CS2000 compact scale is a lightweight, portable scale perfectly suited for use in laboratory, industrial, education and home use applications. Applications can include forensic testing, quality control, formulation, soil sampling, postal weighing and dietary needs

Omni Controls offers Megger Thermal Imaging Camera TC3231 it is essentially an IR thermometer combined with a thermal imaging camera all in one. It features a selectable thermal palette display, blended image function, temperature alarms and centre-spot temperature.

Megger TC3231 Thermal Imaging Camera for sale at Omni Controls, it is essentially an infrared thermometer combined with a thermal imaging camera all in one. It features a selectable thermal palette display, blended image function.

Omni Controls offers, Megger TRS1 Transformer Ratio Standard which can give high accuracy reference ratio standard, this unique standard is able to provide ratios in both step down and step up test modes.

Omni Controls offers, Megger TRS1PLUS Transformer Ratio Standard which can give high accuracy reference ratio standard, this unique standard is able to provide ratios in with Step Down & Step Up test modes.