Best Vape Products

Asmodus Anani MTL RTA is a rebuild able tank atomizer specially designed for Mouth to Lung MTL vaping that gives a feel of pod in which user is in full control. The Anani is built with top-notch stainless steel and Ultem for adequate heat dissipation.

A single fixed airflow inlet is made for air to enter in to the honeycomb shaped internal airflow inlet which focuses air into the coil of build deck. The build deck works as a single coil type of deck with single post holes on each side which is secured into place via a Phillips head screw. The Asmodus Anani MTL RTA has a very unique, double insulation to prevent the build deck from leakage of the e-juice. Its simple just remove the cap off the knurled area and set the top cap drip tip down and its done. The Ultem cap is has a 510 drip tip which can be taken off for different look or replaced with 510 tip according to your choice.

Package Contents:

1x Anani MTL RTA by asMODus
2x Prewrapped Ni80 28g coils
1x Phillips head screwdriver
1x Spare parts pack
1x User manual

GeekVape Aegis Boost Cartridge with Coil!

Features and Specs:

Refillable Cartridge Design
E-Liquid Capacity: 3.7ml
Includes (1) Empty Refillable Pod Cartridge
Includes (1) GV Boost Kanthal Mesh Coil 0.4ohm Atomizer Head (Pre-installed) (25 - 33W)
Includes (1) GV Boost Kanthal Mesh Coil 0.6ohm Atomizer Head (15 - 25W)
Includes (1) Drip Tip
Package Contents:

1 x Refillable Empty Pod Cartridge
1 x GV Boost Kanthal 0.4ohm Atomizer Head (Pre-installed)
1 x GV Boost Kanthal 0.6ohm Atomizer Head
1 x Drip Tip

Here is the newest Ambition Mods Purity Plus MTL RTA,Unlike the "old" model, the PLUS has a diameter of 22mm and a capacity of well 3.5ml.

An atom designed exclusively for cheek shooting, but which offers the possibility, even to the most demanding, to have a double adjustment, and consequently a more airy shot.

On one side only: 1.2 / 1.0 / 0.8 / 0.6

On both sides: 1.2 / 1.0 / 0.8 / 0.6 x 2

It is possible to adjust the liquid intake through the levels indicated on the chimney. Turning counterclockwise, it decreases.

Easy top loading (Top Refil) allows easy and intuitive filling.

Features
Top fill design
Single or Dual airflow from AFC ring
Deep well for easy cotton installation
Juiceflow Control
Stainless Steel Construction
Great flavour

Here is the newest Vapefly Kriemhild Sub Ohm Tank, the third charity project by Vapefly & German 103, features 5.0ml big capacity with easy top refilling and the self-closing e-juice holes will avoid leaking efficiently. It is compatible with single/ dual/ triple mesh coil and RBA coil (Sold separately) for different flavors. Plus the bottom adjustable airflow, Kriemhild tank will bring you the fabulous flavor absolutely!

Features:
1. A third charity project by Vapefly & German 103
2. Craftmanship & Aesthetics
3. 5ml big capacity
4. Spring-loaded sliding top cap
-easy top refilling
-changeable silicon of filling port
-child lock
5. Pull-plug coil for easy replacement
-Ni80 mesh coil
-0.15ohm Trip mesh coil (50-80W)
-0.2ohm single mesh coil (50-80W)
6. Self-closing e-liquid holes avoid leaking
7. Bottom airflow with fabulous flavor

Each set contain:
1pc Kriemhild Tank
1pc Triple mesh coil(0.15ohm)
1pc Single mesh coil(0.2ohm, pre-installed)
1pc Glass tube
7pc O-rings
1pc filling port silicon
1pc Pole silicon
1pc User manual

Mechlyfe Ratel XS 80w AIO Rebuild-able Pod Kit is powered by one external 18650 battery, wit a maximum output of 80W. The Mechlyfe ratel XS Kit comes with a single coil build deck. The beautiful resin panels of the Mechlyfe Ratel XS is a mesmerizing device to hold in hands, The airflow valve is at the bottom which brings two ways of DL & MTL AFC. The 510 drip tip has a high compatibility with others.

The Uwell Crown Replacement Pod Cartridge comes in a pack of two. Right now there are two different resistance types, 0.6Ω DTL and 1.0Ω MTL. The Uwell Crown Pod cartridge is open type cartridge. The pods can handle 3ml ejiuce. It has a top fill design that reduces the leakage due to which you wont be refilling your favorite ejuice and nicotine again and again. It is compatible with 0.6 Ohm and 1.0 Ohm that is restricted for DTL. Because of dual heating wire design the atomization gives an excellent and strong flavor. The Uwell Replacement Refillable Pod Cartridge is designed for Uwell Crown Pod System Kit.

Packing list:
1 x 2pcs Crown Refillable Cartridge

Smok G-Priv 3 230W Box Mod is powered by the latest IQ-G chip, which makes the maximum output up to the 230W mark and the firing time is low to 0.001S. The back side of G-Priv 3 Box Mod has acrylic shell like pattern with smooth texture. the colors make the the look of whole mod very trendy and modern. The 230w G-PRIV 3 Mod comes with a 2.4 inch gigantic touch screen, that shows the information like vaping effect, voltage battery life and 6 different colors for screen settings. The device has a secondary lock/unlock button for the the touch screen. The Smok G-PRIV 3 battery occupy a large area strong magnetic adsorption that is easy to install and remove. What's more, G-PRIV 3 Mod provides multiple types of protections to avoid potential risks, making your vaping experience more safely.

The Vaptio Cosmo Plus Starter Kit has a pretty ergonomic hand-palm that is ultra-portable and easy to handle. Adopting an exquisite surface treatment process and framework curve detail process, Cosmo Plus gives a strong three-dimensional visual impact with its filamentous surface textures, smooth hand feeling, and spectacular high-gloss color collocation. The device is powered with a 1500mAh battery, vapito Cosmo Plus has a maximum output of 35W with a 0.69 inch OLED screen with optional modes of VV/VW/BYPASS. Cosmo Plus offers an extremely intuitive way to satisfy vapers' needs for better user experience feeling. With innovative airflow adjustment, the amount of steam can be easily adjusted by simply tightening the glass tube.

Technical Data:
Mod Size: 20.3 * 27 * 70mm
Tank Size: 18.5 * 56.9mm
Mod Material: Aluminum Alloy + PC
Tank Capacity: 2.0ml / 4.0ml
Battery Capacity: Built-in 1500mAh
Resistance: 0.7ohm / 1.6ohm
Output Power: 35W Max.
Charging Current: 5V / 1A

Package Includes:
1 * Cosmo Plus Mod
1 * Cosmo Plus Tank
1 * Micro USB Cable
1 * Cosmo Coil (C4, 0.7ohm, Mesh, Pre-installed)
1 * Cosmo Coil (C1, 1.6ohm)
1 * User Manual

Check the newest Innokin Kroma R Zlide Kit,it's a powerful and compact vape mod device that consists of an Innokin Kroma R Mod and an Innokin Zlide Tank. Powered by single 18650 batteries(not included), Kroma R has 80W high power, which can definitely satisfy the vapor chaser. In addition, the Kroma R Mod uses Innokin's proprietary chip with the most diverse features and all the most popular working modes. Enjoy great vaping with Wattage (6-80W) and Voltage (1-7.5V) outputs and Soft, Normal and Boost Modes. All important information is clearly displayed on the bright OLED screen including battery charge, wattage/voltage, coil resistance, puff count, voltage out and wattage lock. The Kroma-R features 2A MicroUSB quick charge and integrated safety protections. As for the Innokin Zlide Tank, it features 4mL/2ml e-juice capacity and features a convenient retractable top-fill design that is secured by a dripper locking system. Moreover, the Kroma-R is great for big cloud DTL vaping with the Ajax tank or enjoy intense MTL flavors with the full line of Z-coils and Platform series tanks.

Technical Data:
Size: 131 * 26 * 40mm
External battery: Single 18650
Work Modes: VW, VV, Boost(Soft / Normal / Hard), Bypass, Curve Modes
Wattage range: 6.0W-80W
Voltage range: 1.0V-7.5V
Cut off time: 3s-18s
Max. output current: 30A
Resistance range: 0.05ohm-3.5ohm
Body material: Premium Zinc alloy
Thread type: 510
Charging port: Mirco USB
Charging current: 5V/2A

Package Includes:
1 x Kroma-R Zlide Kit
1 x USB cable
1 x Spare glass
1 x User manual
1 x Warranty Card

VXV 510 Adapter acts on widening the compatibility of the atomizer that can work with the VOOPOO VINCI and VOOPOO VINCI X. VOOPOO Vinci & Vinci X Kit is compatible with 510 connector type atomizers by using this device. So you could put your favorite tanks and make your own version of a kit!

The EcigWareHouse Present you the New Voopoo NAVI Mod Pod Kit which uses a new generation of GENE AI chipset which is powered by a 1500mAh built in battery to facilitate both the manual and auto modes as per users need. The NAVI Pod Kit comes with a 3.8ml/2ml(TPD) e-juice capacity and comfortable mouthfeel by the drip tip.The Voopoo NAVI Mod Pod Kit uses innovative triple airflow mechanism with patented pneumatic independent airway. Plus the features of supporting all PnP coils,the VOOPOO NAVI Mod Pod System will bring you the excellent flavor and rich clouds. Just get the awesome pod system to home now.

Features:

Innovative pod system with 1500mAh battery
Innovative triple airflow system
New generation of GENE.AI chip
Patented pneumatic independent airway
Unprecedented Sensitivity and Explosive Force
Optional 3.8ml and 2ml visible pods
Widely Support coils for PnP coils
Comfortable Mouthfeel

It comes with

Standard Edition

1 x NAVI Device
1 x NAVI Replacement Pod( 3.8ml )
1 x PnP-VM3 0.45ohm
1 x PnP-VM4 0.6ohm
1 x User Manual
1 x USB Cable
1 x GENE Chip Card
1 x Warranty Card

EcigWareHouse brings you the Artery PAL SE Pod System kit which is sleek vape device with a built-in battery of 700mAh capacity. The Artery PAL SE Pod Kit uses a latest technology which is called sea grass fiver cotton, which brings an outstanding vape flavor to its users. The Artery PAL SE Pod System Kit has a 2ml Cartridge with and internal coil of 1.0Ohm and 1.4Ohm, exactly for MTL vape. It also has two way for vape that means air activation and fire key button activation. It is very convenient for the vapers to select the vaping way they prefer. The top juice refill system makes filling easy too.

Features:

Best for MTL vape
Draw activation/Button activation
Sea grass fiber cotton for amazing flavor
Two selective coils of 1.0ohm/1.4ohm
Top refill with 2ml capacity
Built-in 700mAh battery
Type-C charging port system

It comes with

1 x Artery PAL SE Kit (with 1.0ohm Cartridge)
1 x Artery PAL SE Cartridge (1.4ohm)
1 x Lanyard
1 x Type-C USB Cable
1 x Rubber Ring
1 x User Manual
1 x Warranty Card

The VOOPOO Vinci RBA Coil can supports MTL/Half-DL and is a DIY type coil. Fit for VOOPOO VINCI R Mod Pod Kit/VOOPOO VINCI Mod Pod Kit/VOOPOO VINCI X Mod Pod Kit, 1pc each pack.

Here is the most up to date Lost Vape PRANA Pod System Kit, proclaiming a minimized dimunitive shape, incorporated 500mAh battery-powered battery, and comes combined with a 1mL refillable pod with a coordinated 1.0ohm curl. Developed from quality zinc-composite, the undercarriage is impenetrable to light falls and drops, alleviating harm to the restrictive chipset inside. Housed inside is a 500mAh battery-powered battery, giving adequate capacity to fire the 1.0ohm curl, disintegrating the substance to make scrumptious fume from your preferred eJuice or nicotine salts. Holding up to 1mL inside the refillable pod, the PRANA Pod System is the following vaping pod framework that ought to be added to the assortment, conveying a smaller compact profile and flawless fume yield that is ideal for those searching for attentiveness or love vaping in a hurry.

Features:

Dimensions - 66.8mm by 41.4mm by 14.2mm
Integrated 500mAh Battery
Max. Wattage Output: 12W
3 Power Levels - Low, Medium, High
Zinc-Alloy Chassis Construction
Draw-Activated Firing Mechanism
Single Adjustment Button
LED Battery Life Indicator Light
1mL Refillable Pod - Replaceable Cartridge
Side Fill System - Silicone Stoppered
Integrated 1.0ohm Coil
E-Juice Viewing Window
Magnetic Pod Connection
MicroUSB Port

Includes:
1 Lost Vape Prana
1 Prana Pod
1 MicroUSB Cable
1 User Manual
1 Warranty Card

The Eleaf iStick D Disposable Pod Kit has a 280mAh built in battery with a 1.5ml pod pre filled with nicotine salt, which can be enjoyed a lot with multiple flavors. It can be summed up as a super cool Pod device perfect for beginers to start vaping.

Features:

Built-in 280mAh battery for easy going
Pre-filled nic salt e-liquid
Fancy design with no button
Numerous flavors for options

It comes with

3 x Eleaf iStick D Disposable Pod Device

The EOS 2 is a collaborative effort between Ultroner and asMODus and with its stunning aesthetics and efficiency is sure to impress even the pickiest of vapers. The Ultroner x Asmodus EOS II 180W Box Mod was designed to be exceptionally ergonomic and is powered by the GX-180 UTC chipset. This new chip offers new features such as the capability to change the color of the screen, change screen locking methods, setting puff limiters, and more!

Mission XV KRMA Gen For Billet Box Features

Stainless Steel KRMA Bridge
1mm, 1.5mm, 2mm, 2.5mm, 3mm Airflow Reducers
3.5mm Airflow Without Airflow Reducer
Flat Head Grub Screws
PEEK Insulators
Side Logo & Serial No
Contents

1 x KRMA Bridge
5 x Airflow Reducers: 1mm, 1.5mm, 2mm, 2.5mm, 3mm
1 x Spares Kit

Smok TVF16 Lite Tank, as the name tells it is the lightweight variant of the Smok TVF16 Tank, still it has almost similar outstanding performance as the regular TVF16. The Smok TVF16 Lite has two new mesh coils, one of them is Conical Mesh Coil and other one is Dual mesh Coil. The Conical Mesh Coil powered nexMesh technology, with a innovative conical shape, that is specially designed for powerful and warm throat feel with a huge vapor and wonderful taste. Lets summarize it : 5ml capacity bulb tube, an 810 resin drip tip, an upgraded airflow mechanism and a reliable lock system, gold plating 510 thread connector, all of which makes it the best vaping buddy.

Features:

Super powerful mesh tank with exquisite design
Brand-new TFV16 Lite Mesh coils for massive vapor and superb flavor
2ml/5ml e-juice capacity with sealed top refill system
Revolutionary top cap with secure locking mechanism
Adjustable upgraded airflow system

Each set contain:
1pc TFV16 Lite Tank (5ml)
1pc TFV16 Lite Conical Mesh 0.20ohm Coil Powered by nexMesh (Pre-installed)
1pc TFV16 Lite Dual Mesh 0.15ohm Coil
1pc Glass Tube Replacement
1pc User Manual
Spare Parts

The VGOD Stig Disposable Pod Device is specially designed with nicotine salt. The disposable vaporizer can fullfil the users need upto 270 puffs, and it is to be disposed after its life has ended. The VGOD Stig Disposable Pod has maximum capacity of holding 1.2ml E-juice and is filled with 60mg of nicotine salt. Each Stig Disposable Pod Device comes witha a pack of three.

Available in 60 milligrams of nicotine.

Features:

All in One Device
Draw Activated System
1.2ml E-Liquid Capacity
60mg of E-Liquid
Flavor Profiles Located Below
Non-Refillable
Up to 270 Puffs per Life Cycle
Fully Disposable

DISPOSABLE FLAVORS
VGOD Cubano - 60mg

Cubano by VGOD is a smooth Cubano cigar with a drizzle of creamy vanilla, providing a fresh and rich Cuban tobacco flavor! Each Stig comes with 1.2ml of Salt Nicotine E-Liquid. Comes in a pack of three (3).

VGOD Lush Ice - 60mg

Lush Ice by VGOD is a delicious burst of fresh watermelon on the inhale with sweet undertones of mixed melons and menthol on the exhale, providing a smooth and fruity all-day vaping experience.

VGOD Mighty Mint - 60mg

Mighty Mint by SaltNic is a refreshing cool mint providing the perfect amount of menthol for an irresistible all day vape!

VGOD Tropical Mango - 60mg

Tropical mango by SaltNic brings along a sweet mango with a hint of zing in every puff, providing a refreshing fruity flavor to satisfy your palate all day!

Parameters

Quantity: 3pcs/pack
Coil: Conical Mesh Kanthal 0.2ohm (Best: 60W-85W); Dual Mesh 0.15ohm (Best: 60W-90W)

Buy Now: SMOK TFV16 Lite Replacement Coil

The Damn Vape intense Mesh MTL RDA is a unique vertical mesh sheet MTL RDA, using an ultra compact chamber for better taste, a CTC cotton fastening system, and features a changeable airflow restriction piece too add another layer of customization on top of the adjustable top cap with MTL and DL options. Made from a superior 304 steel that is stainless, the Damn Vape Intense RTA is engineered for the best taste of the flavor featuring a very compact build deck that has remarkably easy to DIY. Featuring two posts with open clamp style terminals at the top, the clamps are fastened by a single Phillips screw per post. Aligned vertically between the posts hangs the 0.18ohm Damn Vape Mesh MTL Sheet with the unique CTC cotton tightening system behind it. Allowing the juice-laden cotton to be pressed against the sheet for vaporization, the cotton can be adjusted via a Phillips screw on the posterior. The top cap features various airflow types along the rim, featuring MTL and DL options that work in conjunction with the midcaps interchangeable PEEK insulator airflow MTL or Restrictive DL options that vent directly to the mesh coil inside. With a variety of options to customize the INTENSE RDA to your liking, the Damn Vape INTENSE Mesh MTL RDA is sure to be a favorite amongst those that chase the flavor.

Features:

24mm Diameter
2mm Deep Juice Wells
Superior 304 Stainless Steel Construction
Small Restrictive Chamber For Flavor
Unique Two Post Build Deck - Vertical Sheet
Side Secured via Phillips Screws
Single Mesh Sheet Configuration
Damn Vape INTENSE Mesh Sheet Coil Series
0.18ohm MTL Mesh Sheet Coil - 15-30W
PEEK Insulator Interchangeable Airflow Restrictor
3 x 1mm Diameter Airflow Holes - MTL
1.1mm x 8mm - Restricted DL
Adjustable Airflow Top Cap - MTL & DL Options
CTC Cotton Tightening System
Side Adjustable via Phillips Screw
510 POM Drip Tip
Threaded 510 Connection

It comes with

1 x Intense Mesh MTL RDA
2 x Mesh MTL Coil
1 x Spare Parts Bag
1 x User Manual
1 x PC Top Cap

The SMOK RPM80 Pro Mod Kit is unique powered by one external 18650 battery and can deliver a max output of 80W. It uses two different Pods that works with specific coils. The RPM80 RPM pod can fit be fitted with all RPM40 coils perfectly, on other side the the RPM80 RGC Pod is the first one by SMOK that has an adjustable airflow and uses the new RGC Conical Mesh 1.07Ohm coil powered by nexMesh that supports the full high 80W of power. The new intelligent IQ-80 chipset with functional protection really makes vaping a lot more comfortable.. The huge e-liquid capacity with the transparent oil window can hold for longer vaping. Moreover the clear LED screen will make the vaping and usage experience more user friendly

Features:

Powered by single 18650 battery with max 80W output
New intelligent IQ-80 chip with functional protections
Adopts two pods with two coils
SMOK's first pod with adjustable bottom airflow
New RGC conical mesh coil powered by nexMesh
Top filling design with transparent pod for visible e-juice

It comes with

1 x RPM80 Pro Device
1 x RPM80 RPM Pod ( RPM Mesh 0.4ohm Coil Pre-installed) (5ml)
1 x RPM80 RGC Pod (RGC Conical Mesh 0.17ohm coil powered by nexmesh Preinstalled DC 0.6ohm Coil Pre-installed) (5ml)
1 x USB Cable
1 x User Manual

The Innokin Kroma-R 80W Box Mod is powered by one 18650 batteries, Innokin Kroma-R 80W Box Mod has a very high power that can definitely fulfill any Vaper. Also the Kroma-R Box Mod uses Innokin's chipset which provides most versatile features and most popular modes. Vaping can be enjoyed witha a wattage of (6-80W) and voltage (1-7.5V) outputs and Soft, Normal and Boost Modes. All the related information is clearly displayed on the bright OLED display screen for example, battery charge, wattage/Voltage, Coil resistance, puff count, voltage and wattage lock. The Kroma R has a 2A Micro USB quick charge and integrated safety.

Features:
External battery: Single 18650
Work Modes: VW, VV, Boost(Soft / Normal / Hard), Bypass, Curve Modes
Wattage range: 6.0W-80W
Voltage range: 1.0V-7.5V
Cut off time: 3s-18s
Max. output current: 30A
Body material: Premium Zinc alloy
Thread type: 510
Charging port: Mirco USB
Charging current: 5V/2A
Package: Gift Box

Each set contain:
1pc Kroma-R Zlide Mod
1pc USB cable
1pc User manual

Here is the latest Uwell MarsuPod PCC Pod System Kit, using a 150mAh rechargeable pod, 1000mAh rechargeable carrying case, it also uses integrated 1.2 Ohm resistance coil to make your favorite e-juice taste even better. Made up of lightweight but quite tough plastic, the MarsuPod PCC starter Kit uses a pod system with a carrying case, that provides enough power for six full charges. It has a clear window to view juice on the Pod, the MarsuPod can be recharged carrying within case and refilled with side fill system covered with plug mad of silicone. When it is placed in to the carrying case, a lever pulls the pod with it and a sliding mouth piece cover hides the top of the pod to avoid debris falling in mouth piece.

Uwell MARSUPOD PCC Starter Kit Features:

Dimensions - 65.4mm by 18.4mm by 10.6mm
Integrated 150mAh Rechargeable Battery
Max. Wattage Output: 11W
Coil Resistance: 1.2ohm
Polycarbonate and PCTG Plastic Construction
Draw-Activated Firing Mechanism
LED Battery Life Indicator Light
Magnetic Pod Connection
1.3mL Refillable Pod - Replaceable Cartridge
Side Fill System - Silicone Stoppered
Pro-FOCS Flavor Boosting Technology
Gold-Plated Bottom Metal Contacts
Uwell MARSUPOD PCC Case Features:

Dimensions - 76.5mm by 43mm by 25.2mm
Integrated 1000mAh Rechargeable Battery
Polycarbonate, PC & ABS Material Chassis Construction
OLED Display Screen
Spring Assisted Pod System Storage
Mouthpiece Cover
MicroUSB Port
Available in Black
Includes:

1 Marsupod Kit
1 MicroUSB Cable
1 User Manual

Check the latest Aspire Pro Pod System, encapsulating a huge capacity in to a very fine chassis design, easily changeable coils, and can store up to 4ml in the huge pod capacity, which makes it the best vaping pod system for newbies as ell as the advanced vapers. Made from the Strong long lasting zinc- alloy, the chassis of the AVP Pro ois light but quite tough, and can withstand a lot of falls and drops. At the bottom of the 4ml refillable pod at the top there is a spring loaded bottom push-to-fill system, making the refilling process easy and preventing leaks in pod. Coils are in plug n play type making easy the removals with a tool, which prevents user from hurting himself. Accepting new coils clocking in at 0.65ohm and 1.15ohm for the mesh and regular coils, respectively, the Aspire AVP Pro can be utilized for both nicotine salts and freebase eJuice. Airflow is adjustable via sliding switch mounted on the face of the AVP Pro Pod System.

Aspire AVP Pro Pod System Features:
ASP Chipset
Dimensions - 96mm by 44mm by 17mm
Integrated 1200mAh Rechargeable Battery
Wattage Output Range: 10-16W
4 Power Levels - 10W, 12W, 14W, 16W
Coil Resistance Range: 0.65-1.15ohm
Zinc-Alloy Chassis Construction
Draw-Activated Firing Mechanism
Wattage Adjustment Button
LED Battery Life Indicator Light
4mL Refillable Pod - Replaceable Coil
Adjustable Airflow Control - Sliding Switch
Bottom Push-To-Fill System
Aspire AVP Pro Coil Series
0.65ohm Mesh Coil
1.15ohm Regular Coil
Plug 'n' Play Coil Installation
Magnetic Pod Connection
Automatic Cut-Off
Short Circuit Protection
Low Voltage Protection
Overcharge Protection
Over Heat Protection
Type-C Port
Available in Black, Gunmetal, Rainbow, and White

Includes:
1 AVP Pro Battery
1 4mL AVP Pod
1 0.65ohm Mesh Coil
1 1.15ohm Standard Coil
1 Type-C Cable
1 User Manual
1 Warranty Card
1 Coil Removal Tool