Learn about the best endzone camera.

Setting up your camera properly when you get it is very useful because it ensures that you get the highest quality pictures and video. This article demonstrates how to set up your Nikon D3400 DIGITAL CAMERA.

The first thing you need to do is to get your battery and to charge it. When you buy the camera you will obtain a battery and a battery charger and, although the battery may look like it is fully charged, it is worth just getting it an extra hour or so in the charger to make sure. The reason for that is that by fully charging and then fully draining your battery as you use it, it does extend the life span of your battery. When you have charged it, you then install it into the camera which is in the outlet here towards the bottom. It can only go in one way -- it gets into with one of these contacts at the very top and it gets into only one way, so if it doesn't go in very easily you're putting it in the wrong manner. Then you just close the entranceway. end zone camera reviews

The next thing you need to do is attach the lens. If you bought the kit lens, which is a great buy, then you will get that in the box with the camera. If you look quietly of the camera here, there is a white dept of transportation and if you look quietly of the lens you will see also there is a white dept of transportation. So, take off the two truck caps very carefully, go with the two white dots, gently fitting it into the bayonet outlet and then turning it anti-clockwise until it clicks.

Now, although you get nearly solutions in the box when you buy the camera, for you to take pictures pretty much instantly, the one solution you don't get when you get box is a memory. Of course you will need a memory to store the pictures and the videos that you shoot on the camera. We suggest getting a SanDisk card and the reason for that is that sound cds will guarantee the life span of the card. It is important to remember they will not guarantee what's on the card in case your card fails SanDisk will replace the card. It is a little extra. The way you put the card into the camera is quietly outlet here. You open it up by pulling it slightly forward and you put the card in facing to you. Just push it in until it clicks and what you'll notice is anytime you push it in completely a green light sensations on the back of the camera to say that it's being done properly. If you need to take the card out then you just press the card and it's really on a spring and it will just bounce out again.

Opposed to this are two other ports. These are very useful because they are a UNIVERSAL SERIAL BUS port which allows you to transfer your pictures directly from the camera to a laptop computer and beneath an HDMI port which allows you to show your pictures on a TV. Neither of these leads are available in the box so if you want to do either of those things you need to buy the leads separately. When you have inserted your memory the next thing to do is to switch the camera on. But first take off the lens cap and activate the lens. Spinning program so well is that you press the button quietly of the lens and you extend the lens out. You need to do this in order for the camera to work because if you don't the camera won't take any pictures.

When you have done that you can first turn on the camera. Once you have done you will see in the back screen that you have various choices to make. First, choose your language and you do that by moving the cross keys left to right and along. Then pick the language and pressing OK. Ignore the SnapBridge option for now. You choose your date in a similar fashion and yourself then choose your time zone in exactly the same way, with the cross keys on the back. All of these things can be changed later anyway so don't worry too much if you get them wrong or in fact if you don't want to worry too much about them now and bypass those options and to come back to them afterwards.

The next thing to do is to format your card. The first time you use your card you need to ensure that it's formatted correctly for this camera. Press the menu button -- the menu that you are looking for is the Set up menu. That is the spanner image, so you go down here and then the second one down is format memory. Now almost always there is an element of danger when you format memory cards, particularly once you started using the camera. If you format the memory, you eliminate everything on it. Even pictures that you think you have protected will be erased so you need to be careful when you format cards. However when you're doing it for the first time you are perfectly at liberty to go to YES and click OK and it will format the memory and attune it to this camera properly.

Well you can shoot pictures with this camera now, but the best thing to do is to select your image quality and your data compresion quality before you do so. The first thing to do is to go back into menu. In this case we're looking at the Shooting Menu and if you go to down then the first thing you locate is IMAGE QUALITY. Now image quality references data compresion rates not about the file size but the data compresion rate is important. You can shoot RAW images with this camera but I would recommend initially at least, shooting JPG. The option I would choose would be JPG FINE Because that is the best data compresion rate for this camera. Once you have done that, you move one down to IMAGE SIZE and again there's no point shooting medium of small images with this camera I would say the best thing to do is to shoot large images. The memory will probably be enough -- a 16 or 32 gigabyte memory -- to shoot hundreds of pictures so you are not restricted to memory space even as were in the past so there's no reason not to shoot large and not to shoot fine JPG images. Even as are in the Shooting Menu, we will go down one more from IMAGE SIZE to ISO awareness. When you switch the camera on for the first time, then the settings are set so your Auto ISO awareness control is on. That means anytime you're in the basic Set Modalities the camera will choose the ISO setting. If you look below the Auto ISO awareness control it will set the most awareness according to what's chosen there and when you get the camera and you switch it about the first time the most is 25600. I would say anytime you're taking normal pictures you probably don't want to go above 1600 probably 3, 200 at the most. By leaving it as it is, you allow the camera to choose far higher ISOs than you otherwise might wish. So if you go into this setting I recommend that you make the most setting as i say 6400 and I would also switch the ISO awareness control OFF because that then means that you have more control over the ISO in the basic settings and also in the manual settings.

After setting the ISO I would stay in the Shooting Menu and move one down again to white balance. It is important. Initially I would put white balance on auto. What white balance does is it sets the white in the picture. If you know anything about colors you know that white is a combination of all colors and so once the camera can set white, it can also set the values for the other colors. So it is very important and it is also very important if you're shooting somewhere where the balance of light is not normal, for example if you are shooting in an office where the light may be slightly blue, or if you are shooting at home under artificial light where the natural color of the light might be slightly yellow. Now you will never see this with your nude eye because the human brain copes with to filter that those tones and those colors out, but the camera might find it and it's really important that the camera is initially is on AUTO so that it can set the white balance itself and try to balance all of the different color components that it sees through the lens.

Now you're in a position to take a picture or shoot a video. You can either do this through the live view screen which enables you to see what is through the lens or you can do this through the more conventional DIGITAL CAMERA way which is to look through the viewfinder. The viewfinder can be attuned to your eyesight. So if you look over the viewfinder and although the camera says what you're looking at is sharp, it doesn't look sharp to you, you can use the dioptric adjuster which is quietly here to change the focal time the viewfinder which means that you can look over it and it looks sharp when in fact the camera says it looks sharp. That's very useful so take some moments just to focus and refocus on a few different things and just be sure the viewfinder, when you're looking through it, looks sharp when the camera says that it is sharp.

One of the things that I change almost instantly is the Auto timer. Cameras have timers with them now in order to help you save the battery charge and that means that sometimes they switch themselves off and it can be really annoying. But you can set your own auto timer length by doing the camera and into the Menu Settings. Go into menu and you type in the Setup Menu then by taking place about the next page -- there are a great deal of settings here -- you will see AUTO OFF TIMERS as an option. If you select that then you can either select Short, Normal or Long which is a fairly universal term that references how long the camera will be on before it buttons itself off or how long the trunk screen will be on before it buttons itself off. Or you can go down to CUSTOM and you can select those program plans of time that you prefer. That's what I really do. I go down to CUSTOM and check the ones that I need which are playback and menus, image review which is how long the images on the back screen for you just to look at get ess taken it. Live view which is the live view screen and the standby timer which is how long the camera is on standby before it buttons itself off.