To ensure that a meter reading is accurate, it is crucial to periodically carry out the meter proving skid tests in which its readings are compared with measurements obtained from proving equipment that is as per the industrial standards.
Bi-directional meter prover facilitates more stable flow rate during proving, lower pressure drop over the meter prover, better repeatability and more accurate calibration, less wear out of the sphere and durability of pipes’ internal coating to name a few.
The industry is searching for diminishing their expenses in functional exercises which were originally designe and tested. The purpose of a flow meter is to periodically extract a representative sampler from a flowing fluid stream in order to determine its constituent properties.
The fluid quality analyzers are mandatory for a fast loop sampling system by right considered as the only possible solution. OGSI supply sampling and analyzer skids that operate non-stop, since fast loop sampling bypasses of main line.
OGSI offers meter provers both as an integrated element of the metering system or as a stand-alone unit. The best advantage of the pipe prover is its ability to allow the full flow of the metering stream to pass through the prover.
The Bi-directional pipe meter prover is a revised sphere prover that enables the displacement ball to travel continuously. Setup of the Bi-directional pipe meter includes a four-way valve that permits fluid flow to be reversed when the sphere reverses direction. It is the most widely used prover system.
There are many things to be considered while choosing an appropriate metering system like Compliance, on-site meter proving, sampling and analysis, data management and security, etc. Along with the metering system and metering skid, quality attributes should always be periodically and correctly monitored and recorded.
The metering system is the heart of any plant that functions in the oil and gas industries. Dubai-based OGSI manufacture top-quality metering system and metering skid. OGSI has designed, manufactured, and successfully commissioned over 400 custody transfer metering systems worth over 2.5 billion dollars.
The metering systems are used for all major transportable hydrocarbons like crude oil, natural gas, LNG, fuel oil, etc. Meter prover and sampling systems are the most popular metering systems, which are essential in the oil and gas sectors. Check here to know more about the metering system and metering skid.
Sampling is the most crucial step in the Oil and Gas industry since accurate sampling analysis leads to premium product quality. A single line transports the sample straight to the final disposal point while only a small amount of sample gets through the analyzer in a fast loop sampling system. Check here to know more about single-line and fast loop sampling system.
A meter prover detects changes in the volume of gas or liquid flowing through a pipe over time. We can ensure the accuracy of the flow measurement by using a meter prover. During meter proving, the fluid's condition should remain stable. Check here for all the details of the meter prover and its types.
A prover is used to prove the repeatability and accuracy of a liquid flow meter under actual operating conditions. Proving on regular basis will assist you in running your operations smoothly and detecting potential future complications.
A meter in service should be regularly proved to verify its accuracy. The earlier determined meter factor may no longer be applicable because of changes in fluid properties, operating circumstances, and physical wear & tear of the meter.
Ultrasonic flow meter are – high accuracy, can clamp on pipe, can tolerate high temperature and its installation is simple. On other side turbine flow meter is advantageous for measuring clean, steady and high-speed flow of fluids having low-viscosity.
A gas meter prover is a device which verifies the accuracy of a gas meter. Provers are typically used in gas meter repair facilities, municipal gas meter shops. OGSI is leading meter prover skid manufacturer that is mounted on a rigid skid base frame.
OGSI has a wide experience in structuring; assembling and authorizing of custody transfer metering system that guarantees exact estimation and dependable activity of the entire framework and every one of its segments
OGSI is a leading manufacturer of metering products. We offer various kinds of meter prover skids that are certified by standard authority and have higher accuracy and performance as compared to other meter provers.
The ultrasonic flowmeter is required for many gas and oil industries applications to measure the flow of liquid or gas which is sent by the ultrasonic waves through a pipe. The ultrasonic flowmeter has two receivers and two transmitters mounted on both sides of the meter that can provide the most accurate readings. Check here to know more uses of ultrasonic flowmeters.
A sampler is simply the instrument that performs sampling and analysis. There are mainly two types of samplers manual and auto, manual sampler requires you to collect a sample manually, whereas an autosampler automates the sample collection process using controllers. On the contrary, each has its own advantages. visit here to know the benefits in detail.
Oil and Gas Systems International manufactures high quality metering and packaged process systems for the Oil, Gas, Petrochemical and Power Generation industries within lo...
