Conveyor Belt Scanning

Conveyor belts are prone to wear and tear of the viable component. Maintaining the belt in the best condition and minimize potential stoppages to increase the service life. Conveyor belt recondition services can provide instant relief from belt damage.

Some of the reasons for conveyor belt damage are listed below:

1. Abrasive material transportation can lead to wear and tear over a period of time. Truly abrasive materials like iron ore operating at high speed can lead to damage of the belt. The materials are caught in the edge or underneath the belt leading to belt wear.
2. Using the right belt for materials is the best way to reduce belt damage. Grade A belts are known to be Abrasion Resistant and can last longer when compared to General Purpose belts. Belts can be differentiated into different types like fabric or rubber belts to suit the materials transported.
3. During transportation materials remain adhered to the conveyor belt below even after it is offloaded at the delivery point. This is called carryback. It causes a host of problems for components. Carryback reduces the life of the belt and its performance. As the carryback layer thickens the more problem is created overtime. Carryback gets stuck in the belt leaving the belt damaged.

Use of proper conveyor belt repair solutions can put your belt back on track. Moreover, the purpose is to eliminate the carryback provide a clean belt free of costly repairs and replacements. Some of the belt cleaners used to clean carryback materials include air knives, brush cleaners, V-Plow, Spray bars, belt scrapers, etc.

Impact of material damage can have unpleasant results. Bilk materials cause damage to the frames, belt and rollers. The materials become large over a period of time making the rollers less effective. The limps between the rollers are stretched to absorb the forces and cut down on stress. The impact can disfigure the belt.

BeltPro conveyor belt vulcanizing press are designed to work in the harshest of conditions. The presses are simple to operate and install. The presses help distribute heat and pressure uniformly.

BeltPro supports splice conveyor belt scanning. Our system reports rusted, missing, corroded, broken and fatigued cords. The system detects splice anomalies both online and offline. All the scanning processes are non-invasive and safe.
http://www.beltpro.in/