Bearing Tool Centre

http://bearingtoolcentre.com/index.php/kann/standard-dial-gauge-m10.html

Designed to work in any position-vertical, horizontal or upside-down with water, oils, kerosene, diesel, petrol etc.

Visit : http://bearingtoolcentre.com/index.php/groz/diaphragm-bilge-pump.html

This allows properties of the electric current in the conductor to be measured, without having to make physical contact with it, or to disconnect it for insertion through the probe. Current clamps are usually used to read the magnitude of a sinusoidal current (as invariably used in alternating current (AC) power distribution systems), but in conjunction with more advanced instrumentation the phase and waveform are available

For More Information Visit : http://bearingtoolcentre.com/index.php/metrix/clamp-on-power-meter.html
.

High accuracy light weight gun for controlling fluid deliveries in most demanding applications Recommended Use: Oils with viscosity up to 2000 cSt Oval gear mechanism for optimum accuracy. Aluminium Die cast meter body with protective shroud Gun with Impact & Weather resistant nylon construction Built-in safety cum continuous Flow lever can be slid over the trigger for continuous un-attended dispensing; or alternatively under the trigger to lock & prevent accidental dispensing Built In swivel at inlet for easy maneuverability Supplied complete with rigid steel extension and manual non drip nozzle.

For More Information Visit : http://bearingtoolcentre.com/index.php/groz/mechanical-oil-control-gun.html

The design essentially consists of a lens to focus the infrared thermal radiation on to a detector, which converts the radiant power to an electrical signal that can be displayed in units of temperature after being compensated for ambient temperature.

The gauge gives accurate readings to 0.1mm. A 'telltale' maximum reading pointer is fitted to retain measurement, allowing the gauge to be applied to the tyre positions where it cannot be easily read. A test piece can be supplied to check the accuracy at 1.6 mm. This is an optional accessory and should be ordered separately. The dial has coloured bands for quick and easy reading.

Visit : http://bearingtoolcentre.com/index.php/baker/tyre-thread-depth-gauge-0-1-mm.html

Available in different throat depths, suitable for different measurement requirements. In series J130, J138/L, and J142, measurement pressure is independent of the user, resulting in accurate readings of thickness without personal bias. J138. 'Push Down Type' thickness gauge is particularly useful where fine measurement is not required - for example plywood. Pushing down the plunger with the index finger closes the measuring contacts.

Visit : http://bearingtoolcentre.com/index.php/baker/push-down-type-0-001-mm-0-00005-inch.html

The gauge gives accurate readings to 0.1mm. A 'telltale' maximum reading pointer is fitted to retain measurement, allowing the gauge to be applied to the tyre positions where it cannot be easily read. A test piece can be supplied to check the accuracy at 1.6 mm. This is an optional accessory and should be ordered separately. The dial has coloured bands for quick and easy reading.

For more information visit : http://bearingtoolcentre.com/index.php/baker/tyre-thread-depth-gauge-0-1-mm.html

High pressure positive displacement meter suitable for in-line and end of line applications Oval gear mechanism for optimum accuracy Electronic Display using two 1.5V batteries Robust Aluminum Die Cast construction with protective shroud.

For More Information Visit : http://bearingtoolcentre.com/index.php/groz/electronic-oil-meter.html

• Measuring rod diameter: ø4mm • Measuring rod lock is attached.*Measuring rod is attached on the rear side of the micrometer. • Carbide-tipped measuring rod model is available.• Ratchet stop provides constant measuring force.

For more information Visit : http://bearingtoolcentre.com/index.php/mitutoyo/magnetic-stand.html

UTM is frequently used to monitor steel thickness in various places of ships and offshore constructions. Surveyors equipped with portable UTM probes reach steel plating in sides, tanks, decks and the superstructure. They can read its thickness by simply touching the steel with the measurement head. Contact is usually assured by first removing visible corrosion scale and then applying petroleum jelly before pressing the probe against metal. It is also used for monitoring pipelines.

For More Information Visit : http://bearingtoolcentre.com/index.php/digital-coating-thickness-gauge.html

• Easy and error-free reading with both up anddown digital counters as well as a dial.• Can be zero-set at any arbitrary position.• Provided with a large adjustment wheel for easy height adjustment.• Clamp can be operated easily and securely.

Visit : http://bearingtoolcentre.com/index.php/mitutoyo/dial-height-gauge-double-column-0-01-mm.html

Bearing Tool Centre is an authorized dealer of Mitutoyo, Baker, Kristeel, Groz, Metrix and Kann. We are a renowned exporter and supplier of measuring Instruments, measurements, testing tools and equipments.

Visit : http://bearingtoolcentre.com/index.php/mitutoyo.html

Available in - Plain (Dia. 12 mm or Dia. 12.7 mm) and Threaded (M12 x 1) Diameters. Also manufactured as per customers' requirements.

Visit : http://bearingtoolcentre.com/index.php/baker/micrometer-head-threaded.html

Auto reversal. Fitted with Jewels and Swiss Miniature self aligning Ball Bearing. Fitted with 2mm dia. Tangusten Carbide Ball Anvil and 8mm dia. Spigots. Also available 1mm dia Tangusten Carbide Ball Anvil, Hight Gauge Adapter, 4mm Dia. spigots and Universal Clamp. Supplied with calibration certificate.

Visit : http://bearingtoolcentre.com/index.php/baker/lever-type-dial-gauge-model-29.html

Bevel Protractor Series 187 Feature. Consists of three sheets of stainless steel, the middle one of which is made for angle measurements.

Visit : http://bearingtoolcentre.com/index.php/mitutoyo/bevel-protractor.html

Universal bevel protector high precision angle gauge for accurate angle measurement of machines, moulds & jigs. Can be attached to height gauge. Comes with blade length of 150 / 300mm & with acute attachment.

Visit : http://bearingtoolcentre.com/index.php/kristeel/universal-bevel-protector-0-to-360-deg-5-min.html

Circumference Gauges Suitable for measuring circumference and diameters of all round bodies. Graduation in mm, Reading ± 0.1 mm

Visit: http://bearingtoolcentre.com/index.php/kristeel/circumference-diameter-gauge-0-1-mm.html

Provides a full 360° rotation for free movement facilitating flexibility to refuel vehicles from virtually any direction. Swivel is installed between the fuel nozzle and hose to reduce strain, providing flexibility so that the fuelling hose lasts longer Aluminium die cast construction with male threaded end made from brass Laminar flow design for higher fuel flow Compatible with fuels conaining alcohol Dual 'O' ring seal for long service life

Website : http://bearingtoolcentre.com/index.php/groz/dual-plane-fuel-nozzle-swivel.html

Indestructible 16” (400 mm) long handle is made with spring steel bars that run all the way through the handle. Bars are locked with the Hammer head using Steel locking plates ensuring that the head never gets dislodged Ergonomic rubber grip handle absorbs shock & vibration reducing fatigue Special Bonding process ensures that head never gets loose from the handle Hammer Head is forged from special steel & is Induction case hardened to 52 to 56 HRC for extended life

Website : http://bearingtoolcentre.com/index.php/cross-pein-hammers.html

Inside Micrometers - Series 345, 145-Caliper Type Features:

Caliper type jaws are made of high-grade, tool steel.

Locking clamp for positive locking of spindle.

Satin-chrome finished.

A special holder is available to be used with Mitutoyo Micrometer Stand.

Visit : http://bearingtoolcentre.com/index.php/mitutoyo/inside-micrometer-jaw-type.html

(1)-ANGLE GAUGE 1° – 45° This angle gauge having 20 nos levels made in stainless steel hardened & tempered. This gauge is useful for measuring angles 1- 45° can be use for checking shaft dove - tail angle. This gauge is useful in tool room. Die makers, mould makers & woodworking industry.

(2)-ANGLE GAUGE SET 5° – 90° This gauge is made of hardened and tempered stainless steel material having a range of 5° to 90° incremental of 5° (total 18 leaves). This gauge can be used to check internal & external angles of any machined part to check dovetail angle of shafts. It is one of the most useful gauges for general purpose fabrication workshop. Tool & Die makers, wood working industry and the quality assurance department to compare angle of any part. All 18 leaves are packed in PVC Pouch.

Visit : http://bearingtoolcentre.com/index.php/kristeel/angle-gauge.html

A spring-loaded plunger expands within a bore (or groove) and is locked in place, allowing measurement of diameter (or width) with an outside micrometer after extraction.

Visit: http://bearingtoolcentre.com/index.php/mitutoyo/telescopic-gauge.html

Solid cast iron construction , 2 way operation , 3 piece threaded steel suction tube with filter , 1” pump inlet , Suitable for 50-210 litre drums , Useful for transferring oil, diesel, kerosene & other non-corrosive media,

Visit: http://bearingtoolcentre.com/index.php/groz/rotary-barrel-pump.html